Festool MFT/3 Multifunction Table
CHEAP,Discount,Buy,Sale,Bestsellers,Good,For,REVIEW, Festool MFT/3 Multifunction TableFestoolMFT/3,Wholesale,Promotions,Shopping,Shipping,Festool MFT/3 Multifunction TableFestoolMFT/3,BestSelling,Off,Savings,Gifts,Cool,Hot,Top,Sellers,Overview,Specifications,Feature,on sale,Festool MFT/3 Multifunction TableFestoolMFT/3 Festool MFT/3 Multifunction TableFestoolMFT/3
Festool MFT/3 Multifunction Table Overview
The New and improved MFT is taller and is 15 lighter than the previous model (MFT 1080) but still provides a strong, sturdy, portable worktable whose guide rail, dual position fence, swivel unit, and stops make clean cuts and precise angles fast and easy. This multi-function table enables a Festool plunge saw to function as a chop saw, radial arm saw, and miter box. When used with Festool routers and saws, exact repeat operations are performed with ease. Features: large support area for safe cutting quick and easy setup and breakdown, foldaway legs with easier to access tensioning knobs, angle stop can be used in any position on the table, adjustable leg to accommodate uneven surfaces while keeping the table level, height-adjustable guide rail lowers onto work-piece for safe sawing of small and narrow work. Table is 28-1/4" x 43-3/8", 35-1/2" high, weight 62 lbs, and folds to 7-3/32", maximum work thickness 3-1/16", maximum working width 27-9/16", working height 35-7/16". Includes (2) guide rail supports, angle unit, fence rail, adjustable stop and guide rail FS 1080. Festool products can only be sold in the 50 states.
Festool MFT/3 Multifunction Table Feature
- Can easily be carried to a jobsite, due to its compact size and lightweight.
- Accurate and repeatable cuts with the guide rail and plunge saw or routers.
- Clamp faster with uniform holes and Festool clamps.
- Use with legs folded out, at full height, or folded in and set on the floor.
- Cost effective, durable, long lasting design that offers maximum versatility.
Festool MFT/3 Multifunction Table Specifications
The Festool MFT/3 Multifunction Table offers a portable, ergonomically designed workspace that's ideal for everything from rough cutting to fine sanding and assembly. It offers a perforated top that's easy to attach tools, guides, and work pieces to, side channels for attaching clamps, and folding legs that allow you to select from two working heights. More than just a table, this kit includes an adjustable stop, an angle unit (protractor head), a fence rail and fence rail clamp, an FS 1080 guide rail, and two guide rail supports.
| ||||
 Angle stop stabilizes fence end to ensure accurate cuts. View larger. |
 Perforated work surface and integrated side rails offer a wide variety of clamping configurations. View larger. |
 Integrated T-Groove side rail lets you easily connect two or more Multi-Function Tables. View larger. |
 Angle unit removes and attaches easily, remains stationary when needed, and has detents for common angles. View larger. |
 Rubber feet protect floors and prevent movement. |
 Threaded inserts protect work surfaces. |
 Ergonomically positioned tensioning knobs. |
Built to be sturdy, the Festool MFT/3 Multifunction Table offers a workspace that measure 43-3/8-inches by 28-1/4-inches, and can support loads up to 260 pounds. Whether you're cutting, routing, sanding, or simply prepping materials for assembly, this ergonomically designed table places your work at the perfect height of 35-7/16 inches, so you can focus on the task at hand instead of worrying about back strain or awkward tool positioning.
If you need more workspace than a single table offers, the table's integrated T-groove side rails can be used to quickly and easily connect two or more Multi-Function Tables to one another. Optional connectors (not included) fit into the side rails to create a sturdy, gap-free bridge.
The multifunction table weighs 54 pounds, allowing you to move it around your workshop or transport it to and from job sites.
Perforated Top Makes Clamping Easy
Designed to work with a large assortment of Festool clamps, the MFT/3 Multifunction Table offers a wide variety of clamping configurations that are ideally suited to both traditional materials and awkward, or oddly shaped, materials.
The table's perforated work surface offers plenty of attachment points. And while previous models of the Multifunction Table used a coarse wood screw for attaching the top, this most recent incarnation offers threaded inserts. These inserts not only prevent damage from over-torquing, but also establish a reference point that makes attaching the top quicker and easier.
Folding Legs Offer Safety, Utility, and Easy Transport
Folding legs make transporting the MFT/3 Multifunction Table to and from job sites easy by providing it with a lightweight, compact profile. The tensioning knobs for the legs are placed far enough from the sides of the table so that you don't have to worry about pinching or banging your hands as you secure the legs. And while you're working you don't have to worry about the table sliding or marking floor surfaces, thanks to the rubber foot caps on the legs.
By allowing you to place the work surface cleanly on the ground, the table's folding design also offers a second workable configuration that's ideal for keeping your tools and clamps at hand for applications like installing flooring.
Includes Guide Rail, Angle Unit, and Angle Stop
Able to deliver precise, splinter-free cuts that are safer than cuts made with a conventional table or radial arm saw, the MFT/3's integrated guide-rail system allows you to make accurate cuts up to three inches deep. Plus it can handle materials that measure up to 27-9/16 inches wide.
In addition, the included angle unit allows for precise, repeatable cuts. Featuring detents at common angles and an easy-to-adjust design, this unit allows you to leave the guide rail and saw in one place while repositioning the work piece and fence. Compared to a miter saw setup where the entire saw head must be repositioned, this saves you time and frustration when it comes time to change cut angles. Plus the angle nit attaches to the table using the V-Groove side rail, enabling easy repositioning, removal, or reattachment.
Also included is an angle stop, which also attaches to the Multi-Function Table using the V-Groove side rail. This stop prevents movement of the angle unit by stabilizing the end of the fence, and it can easily be removed or repositioned using a simple, secure locking knob.
The Festool MFT/3 Multifunction Table is backed by a three-year limited warranty and a 30-day money-back guarantee.
What's in the Box
Festool MFT/3 Multifunction Table, adjustable stop, angle unit (protractor head), fence rail and fence rail clamp, FS 1080 guide rail, and two guide rail supports.
 |
